Thiết bị Siemens khác
A5E01181705
SITRANS F M Accessory MAG 5000/6000 2x 500 m (1640.4 ft) Cable kit including standard coil cable, 3x 1.5 mm2 (3x 0.0024 inch2), gage 18, single shielded with PVC jacket, and special electrode cable, 3x 0.25 mm2 (3x 0.0004 inch2), double shielded with PVC jacket, temperature range: -30 … +70 °C (-22 °F … +158 °F)
A5E00862482
SITRANS F M Accessory MAG 8000 5 m (16.4 ft) Remote cable, with IP68/NEMA 6P plugs – M20, 1 pc.
A5E00862487
SITRANS F M Accessory MAG 8000 10 m (32.8 ft) Remote cable, with IP68/NEMA 6P plugs – M20, 1 pc.
A5E00862497
SITRANS F M Accessory MAG 8000 30 m (98.4 ft) Remote cable, with IP68/NEMA 6P plugs – M20, 1 pc.
8WD4420-0EA
Siren element, alternating tone, black, 24 V AC/DC, 95 – 105 dB, IP65, diameter 70 mm
A5E00861432
2x15m (49.21ft) coaxial cable for FUS060, (75 Ohm, max 70 deg C, black PVC)
8WD4400-1AD
Continuous light element, yellow, 12-230 V AC/DC, 70 mm diameter, base BA 15d without light element
8WD4400-1AE
Continuous light element, clear, 12-230 V AC/DC, 70 mm diameter, base BA 15d without light element
8US1251-5DM07
Busbar system Busbar center-to-center spacing 60 mm Device adapter, Width: 45 mm Bar thickness: 5.10 mm+TT profile for circuit breaker, Contactor Overload relay, Motor feeders S00, S0, Length 182 mm with 1 DIN rail 35 mm, up to 25 A
7NG3092-8KN
Modem for SITRANS TH100/200 with USB interface and software SIPROM T
7NG3211-0NN00
Temperature transmitter SITRANS TH100 for PT100 for installation in connection head Type B (DIN 43729), two-wire system, 4…20 mA, programmable, without electrical isolation Without explosion protection . .
7ML5745-1AC02-1CA0
SITRANS LVL100 Vibrating point level switch. Detects level and material in liquids and slurries. Compact, with 40 mm (1.6 inch) insertion. Approvals: ordinary location, CE Version/Process Temperature: Standard -40 to 100 C Process connection: Thread G 1/2″ (DIN 3852-A) PN64 / 316L Electronics: Transistor output PNP 10…55 V DC Housing: 316L Electrical connection / Protection: Acc. to DIN43650 incl. plug with QuickOn connection / IP65 . .
7ML5501-0AA51
Pointek CLS100 RF Capacitance point level switch, stainless steel process connection. Detects level and interface in liquids, solids, slurries and foam. Compact, with 100 mm (4 inch) insertion, adaptable sensitivity, with the ability to tune out build-up on probe. . . Process connection: 3/4″ NPT ((Taper), ANSI/ASME B1.20.1) Approvals: General Purpose: CE,CSA,FM,RCM Device version: Integral cable version with PVDF probe body Overfill Protection: WHG, German overfill protection
7ML5201-0EA0
SITRANS LU150 Ultrasonic level transmitter: continuous, non-contact, 5 m (16.4 ft) range. Monitors level in liquids and slurries. Basic level performance. . Transducer/Process connection: (PVDF)PVDF copolymer, 2″ NPT ((Taper), ASME B1.20.1) M20 x 1.5 (no cable gland included) .
7ML5440-0BB00-1AA2
SITRANS LR560 Radar level transmitter with flush lens antenna: continuous, non-contact, 100 m (328 ft) range, for general solids applications. Measurement and process temperature range: 40m (131 ft) max range, -40 C degrees to +100 C degrees Process connection: Universal flat-faced flange fits ANSI/DIN/JIS flanges: 4″ / 100 mm, 304 stainless steel Enclosure (with cable inlet): Stainless Steel, 1 X M20 x 1.5 (plastic gland included) . Label: Sitrans LR560 Pressure Rating: 3 bar g (40 psi g) maximum Output/communication: 4 to 20 mA, HART Approvals: Ordinary Locations/General Purpose (Non-Ex), FM, cCSAus, IC, FCC, CE, UKCA, RED, RCM Local display interface: With LDI (local display interface)
7ML5110-1GD07-4AF3
SITRANS Probe LU240 Ultrasonic level transmitter ideal for level, volume, and volume flow measurements. It works with liquids, slurries, and bulk materials up to 12 m (40 ft). . Communications: HART (4 … 20 mA) level, volume, volume flow Ingress protection: IP66, IP68, TYPE 4X, 6 Measurement range/ wetted parts: 200 … 12000 mm (7.87 … 472.44 inch), PVDF Copolymer Process connection: 2″ NPT [(Taper), ASME B1.20.1] . Non wetted parts: Plastic (PBT/PC material) Enclosure Type of protection: Ordinary Locations/General Purpose (Non-Ex), CCSAUS, CE, UKCA, KC, RCM, EAC Electrical connections/ cable entries: 2 x M20 x 1.5 (one general purpose Polyamide cable gland and one Polyamide blocking plug provided) Local HMI: With display (clear lid of PC material)
7ML1115-0BA30
EchoMax XPS-10 Ultrasonic level transducer: continuous, non-contact, 10 m (32.80 ft), for liquids and solids. Mounting thread and facing: 1″ NPT ((Taper), ANSI/ASME B1.20.1) Cable length: 5 m (16.40 ft) Flange, flush mount: No flange Approvals: ATEX II 2GD,FM Class I Div 2/SAA Class 1 Zone 1 .
7ML5110-1DD07-4AF3
SITRANS Probe LU240 Ultrasonic level transmitter ideal for level, volume, and volume flow measurements. It works with liquids, slurries, and bulk materials up to 12 m (40 ft). . Communications: HART (4 … 20 mA) level, volume, volume flow Ingress protection: IP66, IP68, TYPE 4X, 6 Measurement range/ wetted parts: 200 … 6000 mm (7.87 … 236.22 inch), PVDF Copolymer Process connection: 2″ NPT [(Taper), ASME B1.20.1] . Non wetted parts: Plastic (PBT/PC material) Enclosure Type of protection: Ordinary Locations/General Purpose (Non-Ex), CCSAUS, CE, UKCA, KC, RCM, EAC Electrical connections/ cable entries: 2 x M20 x 1.5 (one general purpose Polyamide cable gland and one Polyamide blocking plug provided) Local HMI: With display (clear lid of PC material)
7MH7723-1ND
Termination box 1,2,4 load cell and speed sensor, Mild steel CE, NEMA 4
7ML1106-1CA20-0A
EchoMax XRS-5 Ultrasonic level transducer: continuous, non-contact, 8 m (26 ft) range, for liquids and slurries. Mounting thread: 1″ NPT (Taper), ANSI/ASME B1.20.1 Cable length: 30 m (98.43 ft) Facing: Standard (CSM rubber) Approvals: FM Class I Zone 1, ATEX II 2GD, CSA Class I Div. 2, SAA Ex s Class I Zone 1 & DIP Practice A Zone 20 . . Flange: Without mounting flange
7MF1575-8AA
Junction box for connecting the 7MF1575 transmitter with air vent, protection class IP65 Material: plastics
7MF1572-8AB
Cable hanger for mounting the 7MF1572 transmitter Material: carbon steel, zinc coated
7MF1575-1HA10
Transmitters SITRANS LH300 for hydrostatic level measurement, submersible transmitter, two-wire connection, 4…20 mA, measuring cell Al2O3 ceramics (99,6% purity) with fixed mounted cable material Measuring range: 0…10 mH2O Cable length: 20m Stainless steel 316L (1.4404) Protective cap PPE FKM (standard) without
7MF1565-3CB00-1AA1
SITRANS P200 Transmitters for pressure and absolute pressure for general applications Non-linearity: 0,25 percent (typically) wetted parts material:ceramics, stainless steel plus sealing material; non-wetted parts material: stainless steel Measuring range for gauge: 0 to 16 bar, Overload- pressure 40 bar Output signal: 4 to 20 mA two-wire connection, power supply DC 7 to 33 V without explosion protection Electrical connection: plug to DIN EN 175301-803-A, threat for packed gland M16 (with connector) Process connection: G1/2″ male to EN 837-1 (1/2″ BSP male) (standard for metric pressure ranges mbar, bar) Sealing material between sensor and housing: Viton (FPM, Standard) Standard version
7MF1567-3CE00-1AA1
SITRANS P220 Transmitters for pressure and absolute pressure fully welded version for high-pressure and refrigerant applications Non-linearity: 0,25 Percent (typically) wetted parts material: stainless steel; non-wetted parts material: stainless steel Measuring range for gauge: 0 to 40 bar, Overload- pressure 100 bar Output signal: 4 to 20 mA two-wire connection, power supply DC 7 to 33 V without explosion protection Electrical connection: plug to DIN EN 175301-803-A, threat for packed gland M16 (with connector) Process connection: G1/2″ male to EN 837-1 (1/2″ BSP male) (standard for metric pressure ranges mbar, bar) Standard version Standard version
7MF1572-1FA10
Transmitters SITRANS LH100 for hydrostatic level measurement, submersible transmitter, two-wire connection, 4…20 mA housing material 316L (1.4404) measuring cell ceramics (96%) with fixed mounted LD-PE cable Measuring range: 0 – 6 mH2O Cable lenght: 10 m . . Sealing material between sensor and housing: FPM (standard) Without explosion proof
7MF1572-1HA10
Transmitters SITRANS LH100 for hydrostatic level measurement, submersible transmitter, two-wire connection, 4…20 mA housing material 316L (1.4404) measuring cell ceramics (96%) with fixed mounted LD-PE cable Measuring range: 0 – 10 mH2O Cable lenght: 20 m . . Sealing material between sensor and housing: FPM (standard) Without explosion proof
7MF1572-8AA
Junction box for connecting the 7MF1572 transmitter with air vent, protection class IP65 Material: plastics
7ME6920-1AA30-1AA0
MAG 6000, IP67 / NEMA 4X/6, Polyamid enclosure, With display, 11-30V DC/11-24V AC 50/60 Hz
7ME6920-2EA10-1AA0
MAG 6000, 19 Inch Insert, in IP66 / NEMA 4, ABS Plastic Enclosure, 115-230V AC 50/60 Hz
7MF1565-3BA00-1AA1
SITRANS P200 Transmitters for pressure and absolute pressure for general applications Non-linearity: 0,25 percent (typically) wetted parts material:ceramics, stainless steel plus sealing material; non-wetted parts material: stainless steel Measuring range for gauge: 0 to 1 bar, Overload- pressure 2,5 bar Output signal: 4 to 20 mA two-wire connection, power supply DC 7 to 33 V without explosion protection Electrical connection: plug to DIN EN 175301-803-A, threat for packed gland M16 (with connector) Process connection: G1/2″ male to EN 837-1 (1/2″ BSP male) (standard for metric pressure ranges mbar, bar) Sealing material between sensor and housing: Viton (FPM, Standard) Standard version
7MF1565-3BD00-1AA1
SITRANS P200 Transmitters for pressure and absolute pressure for general applications Non-linearity: 0,25 percent (typically) wetted parts material:ceramics, stainless steel plus sealing material; non-wetted parts material: stainless steel Measuring range for gauge: 0 to 2,5 bar, Overload- pressure 6,25 bar Output signal: 4 to 20 mA two-wire connection, power supply DC 7 to 33 V without explosion protection Electrical connection: plug to DIN EN 175301-803-A, threat for packed gland M16 (with connector) Process connection: G1/2″ male to EN 837-1 (1/2″ BSP male) (standard for metric pressure ranges mbar, bar) Sealing material between sensor and housing: Viton (FPM, Standard) Standard version
7MF1565-3BE00-1AA1
SITRANS P200 Transmitters for pressure and absolute pressure for general applications Non-linearity: 0,25 percent (typically) wetted parts material:ceramics, stainless steel plus sealing material; non-wetted parts material: stainless steel Measuring range for gauge: 0 to 4 bar, Overload- pressure 10 bar Output signal: 4 to 20 mA two-wire connection, power supply DC 7 to 33 V without explosion protection Electrical connection: plug to DIN EN 175301-803-A, threat for packed gland M16 (with connector) Process connection: G1/2″ male to EN 837-1 (1/2″ BSP male) (standard for metric pressure ranges mbar, bar) Sealing material between sensor and housing: Viton (FPM, Standard) Standard version
7MF1565-3BG00-1AA1
SITRANS P200 Transmitters for pressure and absolute pressure for general applications Non-linearity: 0,25 percent (typically) wetted parts material:ceramics, stainless steel plus sealing material; non-wetted parts material: stainless steel Measuring range for gauge: 0 to 6 bar, Overload- pressure 15 bar Output signal: 4 to 20 mA two-wire connection, power supply DC 7 to 33 V without explosion protection Electrical connection: plug to DIN EN 175301-803-A, threat for packed gland M16 (with connector) Process connection: G1/2″ male to EN 837-1 (1/2″ BSP male) (standard for metric pressure ranges mbar, bar) Sealing material between sensor and housing: Viton (FPM, Standard) Standard version
7MF1565-3CA00-1AA1
SITRANS P200 Transmitters for pressure and absolute pressure for general applications Non-linearity: 0,25 percent (typically) wetted parts material:ceramics, stainless steel plus sealing material; non-wetted parts material: stainless steel Measuring range for gauge: 0 to 10 bar, Overload- pressure 25 bar Output signal: 4 to 20 mA two-wire connection, power supply DC 7 to 33 V without explosion protection Electrical connection: plug to DIN EN 175301-803-A, threat for packed gland M16 (with connector) Process connection: G1/2″ male to EN 837-1 (1/2″ BSP male) (standard for metric pressure ranges mbar, bar) Sealing material between sensor and housing: Viton (FPM, Standard) Standard version
7ME6520-4VB13-2AA2
SITRANS FM MAG 5100 W Electromagnetic flow sensor, flanged, diameter DN 15 to DN 1200 (1/2″ to 48″). Suitable for volume flow measurement of liquids (conductive) , for applications in water abstraction, water & wastewater treatment, water distribution networks, custody transfer metering. . DN250, 10 Inch EN 1092-1, PN 10 Carbon steel ASTM A 105, corrosion-resistant coating of category C4 Liner Material: Hard NBR Rubber Hastelloy C-276 incl. grounding electrodes Sensor for remote transmitter (order transmitter separately) No bus communication 1/2 inch NPT cable glands, Polyamid terminal box or MAG 6000i integral mount
7ME6520-5DB13-2AA2-Z F55
SITRANS FM MAG 5100 W Electromagnetic flow sensor, flanged, diameter DN 15 to DN 1200 (1/2″ to 48″). Suitable for volume flow measurement of liquids (conductive) , for applications in water abstraction, water & wastewater treatment, water distribution networks, custody transfer metering. . DN300, 12 Inch EN 1092-1, PN 10 Carbon steel ASTM A 105, corrosion-resistant coating of category C4 Liner Material: Hard NBR Rubber Hastelloy C-276 incl. grounding electrodes Sensor for remote transmitter (order transmitter separately) No bus communication 1/2 inch NPT Polyamid Terminal box or 6000 I compact. Country of origin France
7ME6520-5KB13-2AA2-Z F55
SITRANS FM MAG 5100 W Electromagnetic flow sensor, flanged, diameter DN 15 to DN 1200 (1/2″ to 48″). Suitable for volume flow measurement of liquids (conductive) , for applications in water abstraction, water & wastewater treatment, water distribution networks, custody transfer metering. . DN350, 14 Inch EN 1092-1, PN 10 Carbon steel ASTM A 105, corrosion-resistant coating of category C4 Liner Material: Hard NBR Rubber Hastelloy C-276 incl. grounding electrodes Sensor for remote transmitter (order transmitter separately) No bus communication 1/2 inch NPT Polyamid Terminal box or 6000 I compact. Country of origin France
7ME6520-5RB13-2AA2-Z F55
SITRANS FM MAG 5100 W Electromagnetic flow sensor, flanged, diameter DN 15 to DN 1200 (1/2″ to 48″). Suitable for volume flow measurement of liquids (conductive) , for applications in water abstraction, water & wastewater treatment, water distribution networks, custody transfer metering. . DN400, 16 Inch EN 1092-1, PN 10 Carbon steel ASTM A 105, corrosion-resistant coating of category C4 Liner Material: Hard NBR Rubber Hastelloy C-276 incl. grounding electrodes Sensor for remote transmitter (order transmitter separately) No bus communication 1/2 inch NPT Polyamid Terminal box or 6000 I compact. Country of origin France
7ME6520-6PB13-2AA2-Z F55
SITRANS FM MAG 5100 W Electromagnetic flow sensor, flanged, diameter DN 15 to DN 1200 (1/2″ to 48″). Suitable for volume flow measurement of liquids (conductive) , for applications in water abstraction, water & wastewater treatment, water distribution networks, custody transfer metering. . DN600, 24 Inch EN 1092-1, PN 10 Carbon steel ASTM A 105, corrosion-resistant coating of category C4 Liner Material: Hard NBR Rubber Hastelloy C-276 incl. grounding electrodes Sensor for remote transmitter (order transmitter separately) No bus communication 1/2 inch NPT Polyamid Terminal box or 6000 I compact. Country of origin France
7ME6810-4BC31-1CA0-Z F55
SITRANS FM MAG 8000 Battery-operated electromagnetic flowmeter, flanged, diameter DN 25 to DN 1200 (1″ to 48″). Suitable for volume flow measurement of liquids (conductive) and water applications within abstraction, distribution network, revenue metering and irrigation. . DN125 / Qmx 400 m3/h(m3), 5 Inch / Qmx 1761 GPM(Gx100) , DN125 / Qmx 9.6 Ml/d(Ml) EN 1092-1, PN 16, Conforms to PED EPDM liner and Hastelloy Electrodes, corrosion-resistant coating of category C4 Standard calibration w. max. 0,4% of rate +/- 2mm/s with certificate Region version: Europe Display: m3 based 50 Hz filter Basic version remote 10m Mounted sensor cables w. plugs No additional communication, Standard IrDA interface Internal battery supply (Battery not included) Country of origin France
7ME6910-1AA10-0AA0
MAG 5000, IP67 / NEMA 4X/6, Polyamid enclosure, No display, 115-230V AC 50/60 Hz
7ME6910-1AA10-1AA0
MAG 5000, IP67 / NEMA 4X/6, Polyamid enclosure, With display, 115-230V AC 50/60 Hz
7ME6910-1AA10-1AD0
MAG 5000 CT, IP67 / NEMA 4X/6, Polyamid enclosure, With display, With CT approvals, 115-230V AC 50/60 Hz
7ME6910-1AA30-1AA0
MAG 5000, IP67 / NEMA 4X/6, Polyamid enclosure, With display, 11-30V DC/11-24V AC 50/60 Hz
7ME6910-1AA30-1AD0
MAG 5000 CT, IP67 / NEMA 4X/6, Polyamid enclosure, With display, With CT approvals, 11-30V DC/11-24V AC 50/60 Hz